Titlebook: Materials Characterization; Ramiro Pérez Campos,Antonio Contreras Cuevas,Rodri Book 2015 Springer International Publishing Switzerland 201

jaundiced

Metallurgical Investigation of Heat Input on Robot-Welded Joints Using GMAW Pulsed Process on Structe. At a speed of 35 cm/min, the greater heat input produced a greater increase in volume fraction and width of HAZ with complex microstructures formed by fine-grained ferrite and acicular ferrite. The weld bead reached a greater hardening and volume fraction compared to the HAZ linked to fine acicul

morale

Distortion Evaluation in Dissimilar Stainless Steel Joints Welded by GMAW Processic gas metal arc welding process were microstructurally examined by optical and scanning electron microscope. Austenite twins are presented in the heat affected zone (HAZ) on the austenite plate, on the other hand allotriomorphic ferrite was highlighted in the transition zone. Microhardness test was

visual-cortex

3-D Porosity in T-Welded Connections Repaired by Grinding and Wet Weldingn, those grinded regions were filled by wet welding employing the shielded metal arc welding (SMAW) and a hyperbaric chamber simulating the different water depths: 50, 70, and 100 m. To apply the wet weld beads, there were employed E6013 coated electrodes with vinyl varnish. So, for the porosity ana

scotoma

Synthesis and Characterization of Bimetallic Nanoparticles by Cs-Corrected Scanning Transmission EleSTEM images confirm the obtained contrast in the bimetallic nanoparticles due to atomic number of the elements. Beside with the characterization of the nanoparticles, molecular dynamical simulations for the structural and most stable structure of the PtPd bimetallic nanoparticles have also been perf

ICLE

Application of Silver Decorated Carbon Nanotubes for Environmental Ozone Sensingquality of MWCNTs after being subjected to an oxidative process. High resolution transmission electron microscopy (HRTEM) was employed to investigate structural and morphological features as well as size and distribution of nanoparticles (NPs). The responsiveness of MWCNTs decorated with different N

叢林

Shuttle

SCC of X-65 Weldment Assessment in Diluted NaHCO3 Solutions with Chloride and Sulfate Ionse 0.01 M NaHCO. solution with and without Cl.?+?SO.. ions. The SCC susceptibility of X-65 weldments in diluted NaHCO. solutions was associated with the anodic dissolution, assisted by hydrogen entrapping within the weldment microstructure defects, as hydrogen embrittlement damage. Results were compl

Ccu106

Palliation

事物的方面

Effect of FSW Parameters on Microstructure of Aluminum Matrix Composites Joints and axial force using FSW. In order to determine the different microstructural zones characterization of the samples was carried out by optical microscopy (OM) and scanning electron microscopy (SEM). In addition, an evaluation of mechanical property such as microhardness of the different zones of t