Titlebook: Low Cost Manufacturing Technologies; Proceedings of NERC Shrikrishna Nandkishor Joshi,Uday Shanker Dixit,Sw Conference proceedings 2023 Th

大吃大喝

Low-Cost La(III)-Bentonite@Chitosan and La(III)-Bentonite@Polysulfone Composite Beads for the Remova(III)-bentonite@chitosan and La(III)-bentonite@polysulfone composite beads via phase inversion method has been delineated for the first time. The porosity and pore structures of polysulfone (PSf) beads were controlled through additives like La-Bnt. In this work, we have prepared the mentioned compo

SEMI

大雨

夸張

Development and Characterisation of Bi-porous Metallic Wick for Loop Heat Pipes,pore radius and presents the results. Bi-porous copper wicks with distinguished sizes and pore characteristics are successfully developed for loop heat pipes. The powder compaction is performed at 12 KN force, followed by sintering at three different temperatures and durations. Among these, the best

陳列

ITCH

Concrete

加劇

沒(méi)有準(zhǔn)備

Estimation of Wire Surface Quality Index During Wire Electric Discharge Machining Using Image Proceduring WEDM, a surface quality index (SQI) of eroded wires is determined in order to quantify and minimize the severity of wire surface damages. Zinc-coated brass wire was used for WEDM experiments on Ti–6Al–4V alloy. Field emission scanning electron microscope (FESEM) and energy-dispersive X-ray sp

admission

Mechanical Properties of 3D Printed Modified Auxetic Structure: Experimental and Finite Element Stuoudhry et al. in Comp Part B: Eng 228:109437 [.]) to achieve enhanced energy absorption properties. In-plane quasi-static compression tests were conducted on 3D printed specimens followed by finite element (FE)-based numerical modeling. Results from FE and experimental analysis were used to investig