Titlebook: Diffusion Bonding 2; D. J. Stephenson Book 1991 Elsevier Science Publishers Ltd and Crown Copyright and British Aerospace and United Kingd

搖尾乞憐

書目名稱Diffusion Bonding 2影響因子(影響力)




書目名稱Diffusion Bonding 2影響因子(影響力)學科排名




書目名稱Diffusion Bonding 2網絡公開度




書目名稱Diffusion Bonding 2網絡公開度學科排名




書目名稱Diffusion Bonding 2被引頻次




書目名稱Diffusion Bonding 2被引頻次學科排名




書目名稱Diffusion Bonding 2年度引用




書目名稱Diffusion Bonding 2年度引用學科排名




書目名稱Diffusion Bonding 2讀者反饋




書目名稱Diffusion Bonding 2讀者反饋學科排名

Original

Ambient-Temperature Creep Failure of Silver-Interlayer Diffusion Bonds between Steeloft interlayer, because of the constraint provided by the base metal. However, these joints undergo delayed failure at relatively low tensile stresses at ambient temperatures, apparently by a ductile microvoidcoalescence mechanism at the bond interfaces. Two classes of delayed tensile failure were i

euphoria

Aggressive

Study of the Microstructure Obtained after Diffusion Bonding Inconel 625 to Low Alloy Steel by Hot Uot uniaxial pressing and hot isostatic pressing, have been studied using optical metallography, SEM and STEM techniques. The interdiffusion of the different elements through the interface and the chemical analysis of the different phases have been determined using EDS microanalysis both in SEM and S

墻壁

Development of Diffusion Bonding Techniques for Al-Li base Alloy AA8090ssible from superplastic forming routes. In order to take full advantage of this technology and produce lightweight expanded structures, a selective bonding technique is required which produces a joint with adequate room temperature strength and capable of withstanding the stresses associated with t

招惹

Diffusion Bonding of Superplastic Aluminium Alloys Using a Transient Liquid Phase Interlayer (Zinc) been investigated. The bonding pressure was applied mechanically and the bond strengths were evaluated using a constrained lap shear compression test. The integrity of the bond was also examined using optical and scanning electron microscopy. For 7475 alloy, maximum shear strengths of up to ~ 270 M

招惹

ineptitude

吞噬

Laser Surface Modification of 8090 Alloy with Silicon for Diffusion Bondingmelts at about 550 °C has been produced and the laser parameters for production of shallow porosity-free tracks of this alloy in the sheet surface, with no distortion of the sheet, have been determined. Bonding trials at 560 °C have successfully joined two sheets together although on sectioning, evi

cataract