Titlebook: Design of Jigs, Fixtures and Press Tools; K. Venkataraman Textbook 2022Latest edition The Author(s) 2022 sheet metal forming.Presses and A

Curmudgeon

不遵守

COWER

https://doi.org/10.1007/978-3-030-76533-0sheet metal forming; Presses and Auxiliary Equipment; principles of clamping; grinding; broaching; weldin

COLIC

Design of Locatorsents about the three axes. In order to provide constraints to the body, which has parallel and right-angled plane faces, six pegs are provided, three pegs in the .–. plane, two pegs in the .–. plane and one peg in the .–. plane.

邪惡的你

Design of Clampsb) the clamping device should be quick acting as the loading and unloading time should be as quick as possible; (c) when subjected to excessive vibration or chatter, the clamps should be firm and should not loosen up; (d) the clamp should not damage the workpiece.

先驅(qū)

Drilling Jigserefore, tool designers and production engineers give utmost importance to proper location of the holes in the workpiece as well as on the machine, with the required tolerances and surface finish. It may be seen that the location and size of the hole are two important facets of mass production of components.

Angiogenesis

貴族

Other Types of Fixtureser types of the fixtures particularly turning fixtures need the same amount of attention in the design and construction. In the case of broaching fixtures, the same does not need any specific clamping devices as the broaching action itself will provide the requisite clamping force on to the component.

薄膜

使絕緣