找回密碼
 To register

QQ登錄

只需一步,快速開始

掃一掃,訪問微社區

打印 上一主題 下一主題

Titlebook: Design and Modeling of Mechanical Systems - IV; Proceedings of the 8 Nizar Aifaoui,Zouhaier Affi,Fakher Chaari Conference proceedings 2020

[復制鏈接]
樓主: obsess
21#
發表于 2025-3-25 03:45:29 | 只看該作者
22#
發表于 2025-3-25 09:20:23 | 只看該作者
Biological Fouling: Basic Science and Modelsbtained results confirm improvement of the required design criteria of the sewing mechanism in this study. It is also concluded that the optimized mechanism has 35% less needle Jerk and 20% reduction in term of the transmission angle index (TA) than the one for the Juki machine.
23#
發表于 2025-3-25 12:09:56 | 只看該作者
Biological Fouling: Basic Science and Modelsas slightly more important for the case using an (.) inline plastic short-section than that using an (.) one. Furthermore, results evidenced that other factors influencing the surge attenuation rate were related to the short-section dimensions.
24#
發表于 2025-3-25 15:58:21 | 只看該作者
https://doi.org/10.1007/978-1-4302-0158-8of the proposed technique in attenuating excessive high- and low-pressure surges. However, they evidenced that this technique induced excessive period spreading, thus affecting negatively the operational procedures of the hydraulic system. Lastly, this study provided an estimate of the near-optimal values of the short-section diameter and length.
25#
發表于 2025-3-25 22:56:30 | 只看該作者
https://doi.org/10.1007/978-1-4302-0158-8ositive and negative surge magnitude attenuation was slightly more important for the case of a short penstock made of (.) material than that using an (.) material. Ultimately, it was observed that other factors contributing to the attenuation rate depended upon the short-penstock length and diameter.
26#
發表于 2025-3-26 04:14:08 | 只看該作者
The Critical Modeling Modifiersns. The finite-element software ‘‘Abaqus’’ is used to simulate the humidity diffusion through the composite material. The comparison between the experimental and numerical results shows that the model can predict the hygrothermal behavior of the polyester/glass fiber composite.
27#
發表于 2025-3-26 07:33:25 | 只看該作者
28#
發表于 2025-3-26 09:28:45 | 只看該作者
Two-way ASP.NET/Flash Communication,od of characteristics (MOC) of specified time intervals along with Nelder-Mead optimization algorithm for the estimation of the flaw parameters (size and location). The numerical obtained results have shown a good agreement with the experimental data for the detection and the location of leaks.
29#
發表于 2025-3-26 14:59:31 | 只看該作者
30#
發表于 2025-3-26 20:30:32 | 只看該作者
 關于派博傳思  派博傳思旗下網站  友情鏈接
派博傳思介紹 公司地理位置 論文服務流程 影響因子官網 吾愛論文網 大講堂 北京大學 Oxford Uni. Harvard Uni.
發展歷史沿革 期刊點評 投稿經驗總結 SCIENCEGARD IMPACTFACTOR 派博系數 清華大學 Yale Uni. Stanford Uni.
QQ|Archiver|手機版|小黑屋| 派博傳思國際 ( 京公網安備110108008328) GMT+8, 2026-1-25 19:04
Copyright © 2001-2015 派博傳思   京公網安備110108008328 版權所有 All rights reserved
快速回復 返回頂部 返回列表
宽城| 金湖县| 池州市| 黄龙县| 丹江口市| 井陉县| 青岛市| 泰安市| 富锦市| 平山县| 呈贡县| 永安市| 迭部县| 弋阳县| 永仁县| 上犹县| 泽库县| 阜宁县| 南皮县| 东至县| 垦利县| 常熟市| 西盟| 宁明县| 出国| 台安县| 洪江市| 辽宁省| 喀什市| 普宁市| 霸州市| 诸暨市| 拜城县| 三江| 湘潭市| 南涧| 昌黎县| 北流市| 大兴区| 衡南县| 东城区|