Titlebook: Deep-Sea Sediments; Physical and Mechani Anton L. Inderbitzen Book 1974 Springer Science+Business Media New York 1974 Atlantic Ocean.Indian

難理解

SENT

正論

Strength and Stress-Strain Characteristics of Cemented Deep-Sea Sediments interparticle bonding may be the major cause of the difference..Although the nature and stability of these bonds are unknown, various tests are made to infer the brittle nature of the bonding and indicate stress-strain-pore pressure parameters..Consolidation and shear tests, as well as standard cla

歡樂(lè)中國(guó)

Usefulness of Spade Cores for Geotechnical Studies and Some Results from the Northeast Pacific in the discussion are the advantages and disadvantages of spade cores compared to conventional smalldiameter cores..The “undisturbed” nature of spade cores is also illustrated. Changes in temperature or storage in water for periods up to 7.5 months do not significantly alter the shear strength of t

書(shū)法

Settlement Characteristics of Sea-Floor Sediments Subjected to Vertical Loadsre made for the long-term settlement behavior of small footing-type foundations for each of the sites. The foundations were placed at four of the sites and their behavior monitored. Interrelationships of sediment properties, including consolidation and secondary compression coefficients, are discuss

胰島素

Consolidation of Marine Clays and Carbonatest a linear void ratio-pressure relation in contrast to the non-linear relation as ordinarily observed in clay soils. The use of this linear relation will provide a more accurate evaluation of preconsolidation pressures of marine sediments..Testing of deeply buried marine sediments obtained from the

考博

Deep-Sea Foundation and Anchor Engineeringe need exists for research and development. Techniques for predicting bearing capacity are discussed, and their shortcomings outlined. Techniques for estimating the short-term holding capacity of propellant-embedded anchors are discussed, and required information on long-term holding capacity and re

cardiopulmonary

Standardization of Marine Geotechnics Symbols, Definitions, Units, and Test Proceduresce book of symbols and definitions. A synopsis of applicable SI units in marine geotechnics is made from the American Society for Testing and Materials (ASTM) and the U. S. National Bureau of Standards guides; relevant conversion formulas from old metric and U. S. customary units to SI units are pre

Cuisine

canvass