Titlebook: Analog Circuit Design; Low-Noise, Low-Power Johan H. Huijsing,Rudy J. Plassche,Willy M. C. San Book 1996 Springer Science+Business Media Do

homeostasis

Low-Noise HF Amplifierse and inductive sources, general noise matching conditions are derived. The best noise performance obtainable by using bipolar and CMOS approaches are determined. Design examples and measurement results are presented which confirm the theoretical analyses.

Malcontent

Clumsy

Design of High-Speed Low-Power Sample-and-Hold Amplifiers for Low-Voltage Applicationsese techniques have been utilized in two 3-V sampling circuits, namely, a 100-MHz 10-mW all-npn implementation employing capacitive coupling between the input and output, and a 200-MHz 15-mW BiCMOS design using a low-voltage sampling switch. Each circuit allows swings of 1.5 V, providing 10 bits of dynamic range in a 3-V system.

弄皺

elastic

詞匯

https://doi.org/10.1007/978-3-658-05755-8In this contribution we analyze the basis of mixed mode simulation, with emphasis on the design environment. We study the potential sources of problems and how SGS-THOMSON manages them in its proprietary CAD environment called UNICAD.

威脅你

開花期女

發(fā)芽

M?gliche Arten gemeinsamerUnternehmungeningly significant. Also, the achievable amplifier gain is often quite low in such a technology, since cascoding may not be a practical circuit option due to the resulting reduction of the output signal swing. In this paper, some old and some new circuit techniques will be described for the compensation of these nonideal effects.

HEW