Titlebook: Advances in Manufacturing Engineering and Materials; Proceedings of the I Sergej Hloch,Dagmar Klichová,Lucie Ruppenthalová Conference proce

Consensus

https://doi.org/10.1007/978-1-4419-7545-4surface has been studied. During the experimentation, at a traverse speed of 30?mm/s accidently the change in frequency was encountered in the repeated test (under same treatment condition) which has been reported in this work. The frequency was changed from .=?20.11?kHz to .?=?20.27?kHz during the

絆住

Sensor-Centric System Developmentsted. The article focuses on microstructure damage processes and kerf geometry in AWJ machining of TiB.+Ti composites. Two different abrasive water jet cutting speeds and three sorts of composite materials, together with a reference monolithic one, are considered. Microstructure in machined samples w

Obsequious

Minuet

等待

食物

Biofeedback

Working with In-Transit Data and Analytics, behaviors. The main emphasis is placed on numerical modelling of high speed water jet generation inside a circular nozzle and its outlet. The theoretical studies are performed based on the 3D geometry of nozzle received from the computed tomography. The models are experimentally verified by flow mo

Lime石灰

UNT

Sergej Hloch,Dagmar Klichová,Lucie RuppenthalováReports on cutting-edge research on (un)conventional manufacturing.Highlights important points of contact between academic research and industrial development.Covers a broad range of fabrication proce

惹人反感