Titlebook: 3D Printing and Additive Manufacturing Technologies; L. Jyothish Kumar,Pulak M. Pandey,David Ian Wimpen Book 2019 Springer Nature Singapor

barium-study

無政府主義者

Inoperable

Nutrient Transport by the Invertebrate Gut,ation method ANOVA was used to decide the optimal levels and to find the percentage of contribution of the process parameters. The results show that the Laser power is the most important factor followed by the Bed Temperature and Layer thickness for maximizing the Length and Depth, Minimizing Surfac

聾子

Fabrizio Colombo,Jonathan Gantnerted 3D solid model is translated from virtual to physical model by using additive manufacturing process. Here FDM process is used. A designer can then use hand tools to form the model by carving, shaping, and joining additional material. In this paper, a broken and damaged gear wheel of rotating mac

出生

Francesca Chiaromonte,Kateryna D. Makovao conventional manufacturing technologies such as melting, casting, rolling, forging, etc., AM technologies produces materials with low cost production. An attempt has also been made to study the influence of AM and its direct impact on Indian GDP. Moreover, this detailed analysis would benefit vari

DRILL

A. Priou,A. Sihvola,A. Vinogradov problems are observed and identified through Pareto analysis that on the machine, the non-sticking of the preliminary layers to the hot bed occurred more, thus solutions are provided to avoid this problem which in turn has helped to reduce various other problems occurring while printing the 3D obje

織物

E. A. Evdischenko,A. F. Konstantinovamal levels and percentage of influence of each parameter. The results postulate that the bed temperature is the main key factor followed by the part orientation and layer thickness for optimal value of the hardness and ultimate tensile strength of the SLS processed. This optimized value serves as a

調(diào)味品

慎重

Enhancing Surface Finish of Fused Deposition Modelling Parts,978-3-658-41481-8

盡管

Development and Analysis of Accurate and Adaptive FDM Post-finishing Approach,978-3-658-25349-3